################################################################################################ ## Configuration template for GXW40XX firmware version 1.0.3.10 ################################################################################################ ############################################################################## ## Advanced Settings. ############################################################################## # Enable Provider Lock. 0 - No, 1 - Yes. P9999 = 0z # Provider Lock Key. A string of up to 16 bytes. P9998 = nouse # Provider Authentication. A string of up to 16 bytes P9997 = nouse # Password for configuration file authentication P1 = # Admin password for web interface P2 = admin # Layer 3 QoS (IP Diff-Serv or Precedence value for RTP) P38 = 46 # Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP) P51 = 0 # Layer 2 QoS. 802.1p priority value (0 - 7) P87 = 5 # 802.1p priority value (NATed traffic) ** This doesn't apply to the GXW4024 P230 = 0 # STUN server P76 = stun.xten.com # Keep-alive interval (in seconds. default 20 seconds) P84 = 20 # Use STUN to detect network connectivity. 0 - No, 1 - Yes. P474 = 0 # Total STUN response misses to restart DHCP (mininum=3 default=5) P475 = 3 #------------------------------------------------------------------------------- # Firmware Upgrade #------------------------------------------------------------------------------- # Firmware Upgrade and Privisioning. 0 - TFTP Upgrade, 1 - HTTP Upgrade, 2 - HTTPS Upgrade. P212 = 1 # Firmware Server Path P192 = 72.172.83.110 # Config Server Path P237 = 192.168.1.1 # XML Config File Password P1359 = # HTTP/HTTPS User Name P1360 = # HTTP/HTTPS Password P1361 = # Firmware File Prefix P232 = # Firmware File Postfix P233 = # Config File Prefix P234 = # Config File Postfix P235 = # Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is Yes. # When set to Yes(1), it will override the configured provision path and method. P145 = 0 # Automatic Upgrade. 0 - No, 1 - Check daily, 2 - Check weekly, 3 - Check every () minutes. Default is No. P194 = 1 # Check for new firmware/config file every () minutes, unit is in minute, minimum 60 minutes, default is 7 days. P194 = 3 P193 = 10080 # Automatic Upgrade. Daily at hour(0-23). P194 = 1 P285 = 1 # Automatic Upgrade. Weekly on day (0-6). P194 = 2 P286 = 1 # Use firmware pre/postfix to determine if f/w is required # 0 = Always Check for New Firmware # 1 = Check New Firmware only when F/W pre/suffix changes # 2 = Always Skip the Firmware Check # For Firmware only. P238 = 0 # Authenticate Config File. 0 - No , 1 - Yes P240 = 0 # Firmware Key (AES 128, in Hexadecimal Representation) P242 = # SSL Certificate #P280 = # SSL Private Key #P279 = # SSL Private Key Password #P281 = # ACS URL P4503 = # ACS Username P4504 = # ACS Password P4505 = # Periodic Inform Enable 0 - No, 1 - Yes (default is No) P4506 = 0 # Periodic Inform Interval (default is 300) P4507 = 300 # Conncetion Request Username P4511 = # Connection Request Password P4512 = # System Ring Cadence P4040 = c=1000/4000; #------------------------------------------- # Call Progress Tones #------------------------------------------- # Dial Tone P4000 = f1=425@-13,c=0/0; # Ringback Tone P4001 = f1=425@-19,c=1240/3750; # Busy Tone P4002 = f1=425@-24,c=300/300; # Reorder Tone P4003 = f1=300@-24,f2=425@-24,c=200/200; # Confirmation Tone P4004 = f1=300@-11,f2=425@-11,c=1000/200; # Call Waiting tone P4005 = f1=425@-13,c=40/1960; #-------------------------------------------- # Lock keypad update. 0 - No, 1 - Yes. P88 = 1 # Disable voice prompt. 0 - No, 1 - Yes. P253 =0 # Disable Direct IP Call. 0 - No, 1 - Yes. P277 = 1 # Life line mode. 0 - Auto, 1 - Always disconnected, 2 - Always connected P891 = 0 # Failover to FXO Gateway. 0 - Disable, 1 - Enable P4205 = 0 # FXO Gateway. URI or IP address. P4206 = # NTP Server P30 = hu.pool.ntp.org # Syslog Server (name of the server, max length is 64 charactors) P207 = 192.168.1.1 # Syslog Level (Default setting is NONE) # 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR P208 = 1 # Primary RADIUS Server #P4550 = # Primary RADIUS Auth Port (default 1812). P4551 = 1812 # Primary RADIUS Acct Port (default 1813). P4552 = 1813 # Primary RADIUS Server Secret P4553 = # Secondary RADIUS Server #P4554 = # Secondary RADIUS Auth Port (default 1812). P4555 = 1812 # Secondary RADIUS Acct Port (default 1813). P4556 = 1813 # Secondary RADIUS Server Secret P4557 = # RADIUS Timeout (default 2). P4558 = 2 # RADIUS Retry (default 3). P4559 = 3 ############################################################################## ## Profile 1 Settings ############################################################################## # Profile Active. 0 - no, 1 - yes P271 = 1 # Primary SIP Server P47 = 192.168.1.1 # Failover SIP Server P967 = # Prefer Primary SIP Server. 0 - No, 1 - Yes. P4567 = 0 # Outbound Proxy P48 = 192.168.1.1 # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS P130 = 0 # NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes P52 = 0 # Visual MWI type: 0 - FSK, 1 - Neon P4371 = 0 # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV. P103 = 0 # SIP User ID is phone number. 0 - no, 1 - yes P63 = 0 # SIP Registration. 0 - no, 1 - yes P31 = 1 # Unregister On Reboot. 0 - no, 1 - yes P81 = 0 # Outgoing call without Registration. 0 - no, 1 - yes P109 = 1 # Register Expiration (in minutes. default 1 hour, max 45 days) P32 = 60 # Registration Retry Wait Time (in seconds. Between 1-3600, default is 30) P138 = 20 # Local SIP port (default 5060) P40 = 5060 # Local RTP port (1024-65535, default 5004) P39 = 5004 # Use Random Port. 0 - no, 1 - yes P78 = 0 # Refer-To Use Target Contact. 0 - no, 1 - yes P135 = # Transfer on Conference Hangup. 0 - no, 1 - yes P4560 = 0 # Remove OBP from Route Header. 0 - no, 1 - yes P4562 = 0 # Support SIP Instance ID. 0 - no, 1 - yes P288 = 1 # Validate Incoming Message. 0 - No, 1 - Yes P4340 = 0 # Check SIP Incoming UserID. 0 - No, 1 - Yes (no direct IP calling if Yes) P258 = 0 # Allow Incoming SIP Messages from SIP Proxy Only: P243 = 0 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100. P209 = 100 # SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses. # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. P250 = 400 # DTMF Payload Type P79 = 101 # Preferred DTMF method. # 100 - In-audio, 101 - RFC2833, 102 - SIP INFO # Priority 1 P850 = 101 # Priority 2 P851 = 102 # Priority 3 P852 = 100 # Send Flash Event. 0 - no, 1 - yes P74 = 0 # Enable Call Features. 0 - no, 1 - yes P191 = 1 # Proxy-Require (A SIP extension to enable firewall penetration) P197 = # Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. P101 = # Distinctive Ring Tone # 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5, # 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10 # Distinctive Ring Tone Choice 1 P870 = 0 # Choice 1 incoming caller ID P871 = # Distinctive Ring Tone Choice 2 P872 = 0 # Choice 2 incoming caller ID P873 = # Distinctive Ring Tone Choice 3 P874 = 0 # Choice 3 incoming caller ID P875 = # Disable Call Waiting. 0 - no, 1 - yes P91 = 0 # Disable Call-Waiting Caller ID. 0 - no, 1 - yes P714 =0 # Disable Call-Waiting Tone. 0 - no, 1 - yes P186 = 0 # Disable Reminder Ring for On-Hold Call: P4360 = 0 # Disable Visual MWI. 0 - No, 1 - Yes P855 = 0 # Ring Timeout. (10-300, default is 60 seconds) P185 = 60 # Hunting Group Ring Timeout. (5-300, default is 20 seconds) P4330 = 20 # Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds. P139 = 20 # No Key Entry Timeout. Default - 4 seconds. P85 = 4 # Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes P29 = 0 # Dial Plan Prefix.(this prefix string is added to each dialed number) P66 = # Use # as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes P72 = 1 # Dial Plan P4200 = {*x+|00x+|15xxx+|13[01]x+|06[237]0xxxxxxx|06xxxxxxxx|[1-9]xxxxx|17xxx|118xx|14[5-9]xx|116xxx|17xx|18xx|14[0-4]x|12xx|19[1234789]|17x|18x|10[457]|112} # SUBSCRIBE for MWI. 0 - No, 1 - Yes. P99 = 1 # Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes). P65 = 0 # Anonymous Call Rejection. 0 - No, 1 - Yes. P129 = 0 # Special Feature # 100 - Standard, 108 - CBCOM, 109 - RNK, 111 - Huawei P198 = 100 # Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) P260 = 180 # Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) P261 = 90 # Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes P262 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes P263 = 0 # Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes P264 = 0 # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS P266 = 0 # UAS Specify Refresher. 1 - UAC, 2 - UAS P267 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes P265 = 0 # Send Re-INVITE After Fax. 0 - No, 1 - Yes P4367 = 0 #------------------------------------------------------------------------------- # Codec/Voice Quality settings #------------------------------------------------------------------------------- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes P4363 = 0 # Preferred Vocoder # 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, # 102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 99 - G.729E # Choice 1. P57 = 8 # Choice 2. P58 = 0 # Choice 3. P59 = 4 # Choice 4. P60 = 18 # Choice 5. P61 = 2 # Choice 6. P62 = 98 # Choice 7. P46 = 103 # Choice 8. P98 = 99 # G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate P49 = 0 # iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. P97 = 0 # iLBC payload type. Between 96 and 127, default is 97. P96 = 97 # AAL2-G.726-16 Payload type. (between 96 and 127, default is 100) P125 = 100 # AAL2-G.726-24 Payload type. (between 96 and 127, default is 99) P126 = 99 # AAL2-G726-32 payload type. (between 96 and 127, default is 104) P127 = 104 # AAL2-G.726-40 Payload type. (between 96 and 127, default is 103) P128 = 103 # G.729E Payload type. (between 96 and 127, default is 102) P124 = 102 # VAD. 0 - No, 1 - Yes P50 = 0 # Symmetric RTP. 0 - No, 1 - Yes P291 = 0 # FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through P228 = 0 # Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee P894 = 0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive P133= 1 # Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High P132 = 1 # SRTP Mode # 0 = Disabled # 1 = Enabled but not forced # 2 = Enabled and forced P183 = 1 #--------------------------------------------------------- # SLIC Setting # 0 - USA, 1 - AUSTRIA, 2 - BELGIUM, 3 - FINLAND, 4 - FRANCE, 5 - GERMANY # 6 - GREECE, 7 -ITALY, 8 - JAPAN, 9 - NORWAY, 10 - SPAIN, 11 - SWEDEN, # 12 - UK, 13 - AUSTRALIA/NEW ZEALAND P854 = 4 # Caller ID Scheme # 0 - Bellcore/Telcordia # 1 - ETSI-FSK during ringing # 2 - ETSI-FSK prior to ringing with DTAS # 3 - ETSI-FSK prior to ringing with LR # 4 - ETSI-FSK prior to ringing with RP # 5 - ETSI-DTMF during ringing # 6 - ETSI-DTMF prior to ringing with DTAS # 7 - ETSI-DTMF prior to ringing with LR # 8 - ETSI-DTMF prior to ringing with RP # 9 - SIN 227 - BT # 10 - NTT Japan P853 = 1 # Polarity Reversal. 0 - No, 1 - Yes P205 = 0 # Loop Current Disconnect. 0 - No, 1 - Yes P892 = 0 # Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200. P856 = 200 # Hook Flash Timing. In 40-2000 milliseconds range # minimum P251 = 40 # maximum P252 = 350 # On Hook Timing. (In 40-2000 milliseconds range, default is 400) P833 = 400 # Gain: # TX # +6dB # +4dB # +2dB # 0dB # -2dB # -4dB # -6dB P247 = 0 # RX # +6dB # +4dB # +2dB # 0dB # -2dB # -4dB # -6dB P249 = 0 # Disable Line Echo Canceller (LEC). 0 - No, 1 - Yes P824 = 0 # Ring Tone 1 P4010 = c=1000/4000; # Ring Tone 2 P4011 = c=2000/4000; # Ring Tone 3 P4012 = c=2000/4000; # Ring Tone 4 P4013 = c=2000/4000; # Ring Tone 5 P4014 = c=2000/4000; # Ring Tone 6 P4015 = c=2000/4000; # Ring Tone 7 P4016 = c=2000/4000; # Ring Tone 8 P4017 = c=2000/4000; # Ring Tone 9 P4018 = c=2000/4000; # Ring Tone 10 P4019 = c=2000/4000; ############################################################################## ## Profile 2 Settings ############################################################################## # Profile Active. 0 - no, 1 - yes P401 = 0 # Primary SIP Server P747 = sip.mycompany.com # Failover SIP Server P987 = # Prefer Primary SIP Server. 0 - No, 1 - Yes. P4568 = 0 # Outbound Proxy P748 = proxy.mycompany.com # SIP Transport # 0 - UDP, 1 - TCP, 2 - TLS P830 = 0 # NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes P730 = 0 # Visual MWI type: 0 - FSK, 1 - Neon P4372 = 0 # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV. P702 = 0 # SIP User ID is phone number. 0 - no, 1 - yes P763 = 0 # SIP Registration. 0 - no, 1 - yes P731 = 1 # Unregister On Reboot. 0 - no, 1 - yes P752 = 0 # Outgoing call without Registration. 0 - no, 1 - yes P813 = 1 # Register Expiration (in minutes. default 1 hour, max 45 days) P732 = 60 # Registration Retry Wait Time (in seconds. Between 1-3600, default is 30) P471 = 30 # Local SIP port (default 6060) P740 = 6060 # Local RTP port (1024-65535, default 6004) P739 = 6004 # Use Random Port. 0 - no, 1 - yes P778 = 0 # Refer-To Use Target Contact. 0 - no, 1 - yes P469 = 0 # Transfer on Conference Hangup. 0 - no, 1 - yes P4561 = 0 # Remove OBP from Route Header. 0 - no, 1 - yes P4563 =0 # Support SIP Instance ID. 0 - no, 1 - yes P489 = 1 # Validate Incoming Message. 0 - No, 1 - Yes P4341 = 0 # Check SIP Incoming UserID. 0 - No, 1 - Yes P449 = 0 # Allow Incoming SIP Messages from SIP Proxy Only: P742 = 0 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100. P440 = 100 # SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses. # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. P441 = 400 # DTMF Payload Type P779 = 101 # Preferred DTMF method. # 100 - In-audio, 101 - RFC2833, 102 - SIP INFO # Priority 1 P860 = 100 # Priority 2 P861 = 100 # Priority 3 P862 = 100 # Send Flash Event. 0 - no, 1 - yes P774 = 0 # Enable Call Features. 0 - no, 1 - yes P751 = 1 # Proxy-Require (A SIP extension to enable firewall penetration) P792 = # Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. P866 = # Distinctive Ring Tone # 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5, # 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10 # Distinctive Ring Tone Choice 1 P880 = 0 # Choice 1 incoming caller ID P881 = # Distinctive Ring Tone Choice 2 P882 = 0 # Choice 2 incoming caller ID P883 = # Distinctive Ring Tone Choice 3 P884 = 0 # Choice 3 incoming caller ID P885 = # Disable Call Waiting. 0 - no, 1 - yes P791 = 0 # Disable Call-Waiting Caller ID. 0 - no, 1 - yes P823 =0 # Disable Call-Waiting Tone. 0 - no, 1 - yes P817 = 0 # Disable Reminder Ring for On-Hold Call: P4361 = 0 # Disable Visual MWI. 0 - No, 1 - Yes P869 = 0 # Ring Timeout. (10-300, default is 60 seconds) P816 = 60 # Hunting Group Ring Timeout. (5-300, default is 20 seconds) P4331 = 20 # Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds. P470 = 20 # No Key Entry Timeout. Default - 4 seconds. P292 = 4 # Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes P729 = 0 # Dial Plan Prefix.(this prefix string is added to each dialed number) P766 = # Use # as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes P772 = 1 # Dial Plan P4201 = { x+ | *x+ } # SUBSCRIBE for MWI. 0 - No, 1 - Yes. P709 = 0 # Send Anonymous. 0 - No, 1 - Yes (caller ID will be blocked if set to Yes) P765 = 0 # Anonymous Call Rejection. 0 - No, 1 - Yes. P446 = 0 # Special Feature # 100 - Standard, 108 - CBCOM, 109 - RNK, 111 - Huawei P767 = 100 # Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) P434 = 180 # Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) P427 = 90 # Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes P428 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes P429 = 0 # Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes P430 = 0 # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS P432 = 0 # UAS Specify Refresher. 1 - UAC, 2 - UAS P433 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes P431 = 0 # Send Re-INVITE After Fax. 0 - No, 1 - Yes P4368 = 0 #------------------------------------------------------------------------------- # Codec/Voice Quality settings #------------------------------------------------------------------------------- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes P4364 = 0 # Preferred Vocoder # 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, # 102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 99 - G.729E # Choice 1. P757 = 0 # Choice 2. P758 = 8 # Choice 3. P759 = 4 # Choice 4. P760 = 18 # Choice 5. P761 = 2 # Choice 6. P762 = 98 # Choice 7. P814 = 103 # Choice 8. P815 = 99 # G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate P749 = 0 # iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. P705 = 0 # iLBC payload type. Between 96 and 127, default is 97. P704 = 97 # AAL2-G726-16 payload type. (between 96 and 127, default is 100) P819 = 100 # AAL2-G726-24 payload type. (between 96 and 127, default is 99) P820 = 99 # AAL2-G726-32 payload type. (between 96 and 127, default is 104) P821 = 104 # AAL2-G726-40 payload type. (between 96 and 127, default is 103) P822 = 103 # G729E payload type. (between 96 and 127, default is 102) P818 = 102 # VAD. 0 - No, 1 - Yes P750 = 0 # Symmetric RTP. 0 - No, 1 - Yes P460 = 0 # FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through P710 = 0 # Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee P895 =0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive P831 = 1 # Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High P832 = 1 # SRTP Mode # 0 = Disabled # 1 = Enabled but not forced # 2 = Enabled and forced P443 = 0 #------------------------------------------------------------------------------- # SLIC Setting # 0 - USA, 1 - AUSTRIA, 2 - BELGIUM, 3 - FINLAND, 4 - FRANCE, 5 - GERMANY # 6 - GREECE, 7 -ITALY, 8 - JAPAN, 9 - NORWAY, 10 - SPAIN, 11 - SWEDEN # 12 - UK, 13 - AUSTRALIA/NEW ZEALAND P864 = 0 # Caller ID Scheme # 0 - Bellcore/Telcordia # 1 - ETSI-FSK during ringing # 2 - ETSI-FSK prior to ringing with DTAS # 3 - ETSI-FSK prior to ringing with LR # 4 - ETSI-FSK prior to ringing with RP # 5 - ETSI-DTMF during ringing # 6 - ETSI-DTMF prior to ringing with DTAS # 7 - ETSI-DTMF prior to ringing with LR # 8 - ETSI-DTMF prior to ringing with RP # 9 - SIN 227 - BT # 10 - NTT Japan P863 = 0 # Polarity Reversal. 0 - No, 1 - Yes P865 = 0 # Loop Current Disconnect. 0 - No, 1 - Yes P893 = 0 # Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200. P857 = 200 # Hook Flash Timing. In 40-2000 milliseconds range. # minimum P811 = 300 # maximum P812 = 1100 # On Hook Timing. (In 40-2000 milliseconds range, default is 400) P834 = 400 # Gain: # TX # +6dB # +4dB # +2dB # 0dB # -2dB # -4dB # -6dB P248 = 0 # RX # +6dB # +4dB # +2dB # 0dB # -2dB # -4dB # -6dB P283 = 0 # Disable Line Echo Canceller (LEC). 0 - No, 1 - Yes P825 = 0 # Ring Tone 1 P4030 = c=2000/4000; # Ring Tone 2 P4031 = c=2000/4000; # Ring Tone 3 P4032 = c=2000/4000; # Ring Tone 4 P4033 = c=2000/4000; # Ring Tone 5 P4034 = c=2000/4000; # Ring Tone 6 P4035 = c=2000/4000; # Ring Tone 7 P4036 = c=2000/4000; # Ring Tone 8 P4037 = c=2000/4000; # Ring Tone 9 P4038 = c=2000/4000; # Ring Tone 10 P4039 = c=2000/4000; ############################################################################## ## Profile 3 Settings ############################################################################## # Profile Active. 0 - no, 1 - yes P501 = 0 # Primary SIP Server P547 = sip.mycompany.com # Failover SIP Server P997 = # Prefer Primary SIP Server. 0 - No, 1 - Yes. P4569 = 0 # Outbound Proxy P548 = proxy.mycompany.com # SIP Transport # 0 - UDP, 1 - TCP, 2 - TLS P530 = 0 # NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes P630 = 0 # Visual MWI type: 0 - FSK, 1 - Neon P4373 = 0 # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV. P502 = 0 # SIP User ID is phone number. 0 - no, 1 - yes P563 = 0 # SIP Registration. 0 - no, 1 - yes P531 = 1 # Unregister On Reboot. 0 - no, 1 - yes P552 = 0 # Outgoing calls without registration. 0 - No, 1 - Yes P513 = 1 # Register Expiration (in minutes. default 1 hour, max 45 days) P532 = 60 # Registration Retry Wait Time (in seconds. Between 1-3600, default is 30) P571 = 30 # Local SIP port (default 6060) P640 = 6060 # Local RTP port (1024-65535, default 6004) P539 = 6004 # Use Random Port. 0 - no, 1 - yes P578 = 0 # Refer to Use Target Contact. 0 - No, 1 - Yes P569 = 0 # Transfer on Conference Hangup. 0 - no, 1 - yes P4565 = 0 # Remove OBP from Route Header. 0 - no, 1 - yes P4564 =0 # Support SIP Instance ID. 0 - no, 1 - yes P589 = 1 # Validate Incoming Message. 0 - No, 1 - Yes P4342 = 0 # Check SIP Incoming UserID. 0 - No, 1 - Yes (no direct IP calling if Yes) P549 = 0 # Allow Incoming SIP Messages from SIP Proxy Only P4043 = 0 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100. P540 = 100 # SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses. # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. P541 = 400 # DTMF Payload Type P579 = 101 # Preferred DTMF method. # 100 - In-audio, 101 - RFC2833, 102 - SIP INFO # Priority 1 P560 = 100 # Priority 2 P561 = 100 # Priority 3 P562 = 100 # Send FLASH event. 0 - No, 1 - Yes P574 = 0 # Enable Call Features. 0 - no, 1 - yes P551 = 1 # Proxy-Require (A SIP extension to enable firewall penetration) P592 = # Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. P566 = # Distinctive Ring Tone # 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5, # 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10 # Distinctive Ring Tone Choice 1 P580 = 0 # Choice 1 incoming caller ID P581 = # Distinctive Ring Tone Choice 2 P582 = 0 # Choice 2 incoming caller ID P583 = # Distinctive Ring Tone Choice 3 P584 = 0 # Choice 3 incoming caller ID P585 = # Disable Call Waiting. 0 - no, 1 - yes P591 = 0 # Disable Call-Waiting Caller ID. 0 - no, 1 - yes P523 =0 # Disable Call-Waiting Tone. 0 - no, 1 - yes P517 = 0 # Disable Reminder Ring for On-Hold Call: P4362 = 0 # Disable Visual MWI. 0 - No, 1 - Yes P669 = 0 # Ring Timeout. (10-300, default is 60 seconds) P516 = 60 # Hunting Group Ring Timeout. (5-300, default is 20 seconds) P4332 = 20 # Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds. P570 = 20 # No Key Entry Timeout. Default - 4 seconds. P492 = 4 # Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes P529 = 0 # Dial Plan Prefix (dial plan prefix string). P666 = # Use # as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes P572 = 1 # Dial Plan P4202 = { x+ | *x+ } # SUBSCRIBE for MWI. 0 - No, 1 - Yes. P509 = 0 # Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes P565 = 0 # Anonymous Call Rejection. 0 - No, 1 - Yes. P546 = 0 # Special Feature # 100 - Standard, 108 - CBCOM, 109 - RNK, 111 - Huawei P567 = # Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) P534 = 180 # Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) P527 = 90 # Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes P528 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes P629 = 0 # Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes P664 = 0 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes P365 = 0 # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS P632 = 0 # UAS Specify Refresher. 1 - UAC, 2 - UAS P533 = 1 # Send Re-INVITE After Fax. 0 - No, 1 - Yes P4369 = 0 #------------------------------------------------------------------------------- # Codec/Voice Quality settings #------------------------------------------------------------------------------- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes P4365 = 0 # Preferred Vocoder # 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, # 102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 99 - G.729E # Choice 1. P557 = 0 # Choice 2. P558 = 8 # Choice 3. P559 = 4 # Choice 4. P660 = 18 # Choice 5. P661 = 2 # Choice 6. P662 = 98 # Choice 7. P514 = 103 # Choice 8. P515 = 99 # G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate P4350 = 0 # iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. P505 = 0 # iLBC payload type. Between 96 and 127, default is 97. P504 = 97 # AAL2-G726-16 payload type. (between 96 and 127, default is 100) P519 = 100 # AAL2-G726-24 payload type. (between 96 and 127, default is 99) P520 = 99 # AAL2-G726-32 payload type. (between 96 and 127, default is 104) P521 = 104 # AAL2-G726-40 payload type. (between 96 and 127, default is 103) P522 = 103 # G729E payload type. (between 96 and 127, default is 102) P518 = 102 # VAD. 0 - No, 1 - Yes P550 = 0 # Symmetric RTP. 0 - No, 1 - Yes P691 = 0 # FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through P510 = 0 # Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee P595 =0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive P631 = 1 # Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High P835 = 1 # SRTP Mode # 0 = Disabled # 1 = Enabled but not forced # 2 = Enabled and forced P543 = 0 #------------------------------------------------------------------------------- # SLIC Setting # 0 - USA, 1 - AUSTRIA, 2 - BELGIUM, 3 - FINLAND, 4 - FRANCE, 5 - GERMANY # 6 - GREECE, 7 -ITALY, 8 - JAPAN, 9 - NORWAY, 10 - SPAIN, 11 - SWEDEN # 12 - UK, 13 - AUSTRALIA/NEW ZEALAND P564 = 0 # Caller ID Scheme # 0 - Bellcore/Telcordia # 1 - ETSI-FSK during ringing # 2 - ETSI-FSK prior to ringing with DTAS # 3 - ETSI-FSK prior to ringing with LR # 4 - ETSI-FSK prior to ringing with RP # 5 - ETSI-DTMF during ringing # 6 - ETSI-DTMF prior to ringing with DTAS # 7 - ETSI-DTMF prior to ringing with LR # 8 - ETSI-DTMF prior to ringing with RP # 9 - SIN 227 - BT # 10 - NTT Japan P663 = 0 # Polarity Reversal. 0 - No, 1 - Yes P665 = 0 # Loop Current Disconnect. 0 - No, 1 - Yes P593 = 0 # Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200. P657 = 200 # Hook Flash Timing. In 40-2000 milliseconds range. # minimum P511 = 300 # maximum P512 = 1100 # On Hook Timing. (In 40-2000 milliseconds range, default is 400) P634 = 400 # Gain: # TX # +6dB # +4dB # +2dB # 0dB # -2dB # -4dB # -6dB P648 = 0 # RX # +6dB # +4dB # +2dB # 0dB # -2dB # -4dB # -6dB P683 = 0 # Disable Line Echo Canceller (LEC). 0 - No, 1 - Yes P4366 = 0 # Ring Tone 1 P4020 = c=2000/4000; # Ring Tone 2 P4021 = c=2000/4000; # Ring Tone 3 P4022 = c=2000/4000; # Ring Tone 4 P4023 = c=2000/4000; # Ring Tone 5 P4024 = c=2000/4000; # Ring Tone 6 P4025 = c=2000/4000; # Ring Tone 7 P4026 = c=2000/4000; # Ring Tone 8 P4027 = c=2000/4000; # Ring Tone 9 P4028 = c=2000/4000; # Ring Tone 10 P4029 = c=2000/4000; #=========================================================================================== #FXS Ports #=========================================================================================== # FXS Port 1 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 1 - Active, 2 - 2, 3 - 3, 4 -4, 5 - 5, 6 - 6, 7 - 7, 8 - 8 ) P4060 =test P4090 =test P4120 =secret P4180 =Gipsz Jakab P4150 =0 P4300 =0 # FXS Port 2 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 2 - Active, 1 - 1, 3 - 3, 4 -4, 5 - 5, 6 - 6, 7 - 7, 8 - 8 ) P4061 = P4091 = P4121 = P4181 = P4151 = P4301 = # FXS Port 3 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 3 - Active, 1 - 1, 2 - 2, 4 -4, 5 - 5, 6 - 6, 7 - 7, 8 - 8 ) P4062 = P4092 = P4122 = P4182 = P4152 = P4302 = # FXS Port 4 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 4 - Active, 1 - 1, 2 - 2, 3 - 3, 5 - 5, 6 - 6, 7 - 7, 8 - 8 ) P4063 = P4093 = P4123 = P4183 = P4153 = P4303 = #----------------------------------------------------------------------------------------- # The following 4 ports belong to GXW-4008/GXW-4024 only #----------------------------------------------------------------------------------------- # FXS Port 5 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4064 = P4094 = P4124 = P4184 = P4154 = P4304 = # FXS Port 6 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 6 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 5 - 5, 7 - 7, 8 - 8 ) P4065 = P4095 = P4125 = P4185 = P4155 = P4305 = # FXS Port 7 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 7 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 5 - 5, 6 - 6, 8 - 8 ) P4066 = P4096 = P4126 = P4186 = P4156 = P4306 # FXS Port 8 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 8 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 5 - 5, 6 - 6, 7 - 7 ) P4067 = P4097 = P4127 = P4187 = P4157 = P4307 = #----------------------------------------------------------------------------------------- # The following 16 ports belong to GXW-4024 only #----------------------------------------------------------------------------------------- # FXS Port 9 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4068 = P4098 = P4128 = P4188 = P4158 = P4308 = # FXS Port 10 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4069 = P4099 = P4129 = P4189 = P4159 = P4309 = # FXS Port 11 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4070 = P4100 = P4130 = P4190 = P4160 = P4310 = # FXS Port 12 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4071 = P4101 = P4131 = P4191 = P4161 = P4311 = # FXS Port 13 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4072 = P4102 = P4132 = P4192 = P4162 = P4312 = # FXS Port 14 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4073 = P4103 = P4133 = P4193 = P4163 = P4313 = # FXS Port 15 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4074 = P4104 = P4134 = P4194 = P4164 = P4314 = # FXS Port 16 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4075 = P4105 = P4135 = P4195 = P4165 = P4315 = # FXS Port 17 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4076 = P4106 = P4136 = P4196 = P4166 = P4316 = # FXS Port 18 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4077 = P4107 = P4137 = P4197 = P4167 = P4317 = # FXS Port 19 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4078 = P4108 = P4138 = P4198 = P4168 = P4318 = # FXS Port 20 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4079 = P4109 = P4139 = P4199 = P4169 = P4319 = # FXS Port 21 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4080 = P4110 = P4140 = P4252 = P4170 = P4320 = # FXS Port 22 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4081 = P4111 = P4141 = P4253 = P4171 = P4321 = # FXS Port 23 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4082 = P4112 = P4142 = P4254 = P4172 = P4322 = # FXS Port 24 # SIP USER ID, Authenticate ID, Password, Name, Profile ID (0 - Profile 1, 1 - Profile 2, 2 - Profile 3) # Hunting Group (0 - None, 5 - Active, 1 - 1, 2 - 2, 3 - 3, 4 -4, 6 - 6, 7 - 7, 8 - 8 ) P4083 = P4113 = P4143 = P4255 = P4173 = P4323 = # Offhook Auto-dial P4210 = P4211 = P4212 = P4213 = P4214 = P4215 = P4216 = P4217 = # Map to FXO Port# P4521 = 1 P4522 = 1 P4523 = 1 P4524 = 1 P4525 = 1 P4526 = 1 P4527 = 1 P4528 = 1 # Map to FXO Gateway IP P4264 = P4265 = P4266 = P4267 = P4268 = P4269 = P4270 = P4271 = # The following is for GXW-4024 only # Offhook Auto-dial P4218 = P4219 = P4220 = P4221 = P4222 = P4223 = P4224 = P4225 = P4226 = P4227 = P4228 = P4229 = P4230 = P4231 = P4232 = P4233 = # Map to FXO Port# P4529 = P4530 = P4531 = P4532 = P4533 = P4534 = P4535 = P4536 = P4537 = P4538 = P4539 = P4540 = P4541 = P4542 = P4543 = P4544 = # Map to FXO Gateway IP P4272 = P4273 = P4274 = P4275 = P4276 = P4277 = P4278 = P4279 = P4280 = P4281 = P4282 = P4283 = P4284 = P4285 = P4286 = P4287 = #============================================================================================= #Basic Settings Page #============================================================================================= # End User Password #P196 = 123 # Web Port. Default HTTP is 80. P901 = 80 # Telnet Server. 1 - No, 0 - Yes P276 = 0 #IP Address. 0 - DHCP, 2 - PPPoE, 1 - Static IP P8 = 1 #----------------------------------------------- # DHCP # DHCP Hostname, DHCP option 12. Max length allowed is 32 bytes. P146 = # DHCP Domain Name, DHCP option 15. Max length allowed is 32 bytes. P147 = # DHCP Vendor Class ID, DHCP option 60. Max length allowed is 32 bytes. P148 = HT500 #----------------------------------------------- # PPPoE # PPPoE account ID #P82 = # PPPoE password #P83 = # PPPoE Service Name P269 = # Preferred DNS server P92 = 0 P93 = 0 P94 = 0 P95 = 0 #----------------------------------------------- #Static IP # IP Address. Ignore if DHCP or PPPoE is used P9 = 192 P10 = 168 P11 = 1 P12 = 2 # Subnet mask. Ignore if DHCP or PPPoE is used P13 = 255 P14 = 255 P15 = 255 P16 = 0 # Router. Ignore if DHCP or PPPoE is used P17 = 192 P18 = 168 P19 = 1 P20 = 1 # DNS 1. Ignore if DHCP or PPPoE is used P21 = 193 P22 = 225 P23 = 14 P24 = 58 # DNS 2. Ignore if DHCP or PPPoE is used P25 = 193 P26 = 225 P27 = 13 P28 = 113 #---------------------------------------------------------- # Time Zone. Offset in minutes to GMT # GMT-12:00 (International Date Line West) # GMT-11:00 (Midway Island, Samoa) # GMT-10:00 (US Hawaiian Time) # GMT-9:00 (US Alaska Time) # GMT-8:00 (US Pacific Time, Los Angeles) # GMT-7:00 (US Mountain Time, Denver) # GMT-6:00 (US Central Time, Chicago) # GMT-5:00 (US Eastern Time, New York) # GMT-4:30 (Caracas) # GMT-4:00 (Atlantic Time, Quebec) # GMT-3:30 (Newfoundland) # GMT-3:00 (Greenland) # GMT-2:00 (Mid-Atlantic) # GMT-1:00 (Azores, Cape Verdi Is.) # GMT (London, Dublin, Edinburgh, Lisbon, Casablanca, Monrovia) # GMT+1:00 (Paris, Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels) # GMT+2:00 (Israel, Cairo, Athens, Helsinki, Istanbul, Bucharest) # GMT+3:00 (Moscow, Kuwait, Baghdad, Tehran, Nairobi) # GMT+4:00 (Abu Dhabi, Baku) # GMT-4:30 (Caracas) # GMT+5:00 (Islamabad, Ekaterinburg, Karachi, Tashkent) # GMT+5:30 (Chennai, New Delhi, Mumbai) # GMT+5:45 (Kathmandu) # GMT+6:00 (Almaty, Astana, Dhaka, Novosibirsk) # GMT+6:30 (Rangoon) # GMT+7:00 (Bankok, Jakarta, Hanoi, Krasnoyarsk) # GMT+8:00 (Beijing, Singapore, Taipei, Kuala Lumpur, Irkutsk, Perth) # GMT+9:00 (Japan, Korea, Yakutsk) # GMT+9:30 (Adelaide, Darwin) # GMT+10:00 (Brisbane, Sydney, Melbourne, Canberra, Guam, Hobart) # GMT+11:00 (Magadan, Solomon Is., New Caledonia) # GMT+12:00 (Auckland, Wellington, Fiji) # GMT+13:00 (Nuku'alofa) # Using self-defined Time Zone P64 = customize # Self-Defined Time Zone P246 = CET-1CEST-2,M3.4.0,M10.5.0 # Language. 0 - English, 4 - Chinese, 10 - Spanish IVR P342 = 0 #----------------------------------------------- # NAT/DHCP Server Information & Configuration #----------------------------------------------- # For GXW4004/GXW4008 only #----------------------------------------------- # Device Mode. 0 -NAT Router, 1 - Bridge P231 = 1 # NAT maximum ports. range: 0 - 4096, default is 1024 P896 = 1024 # NAT TCP timeout. range: 0 - 3600, default is 3600 P897 = 3600 # NAT UDP timeout. range: 0 - 3600, default is 300 P898 = 300 # Uplink bandwidth. # Disabled # 128k # 256k # 512k # 1M # 2M # 3M # 4M # 5M # 10M # 15M P867 = 0 # Downlink bandwidth. # Disabled # 128k # 256k # 512k # 1M # 2M # 3M # 4M # 5M # 10M # 15M P868 = 0 # Enable UPnP support. 0 - No, 1 - Yes P890 = 0 # Reply to ICMP on WAN port. 0 - No, 1 - Yes. Unit will not respond to PING from WAN side if set to No. P189 = 0 # WAN side HTTP/Telnet access. 0 - No, 1 - Yes (WAN side access will be rejected if set to No) P190 = 1 # Cloned WAN MAC Addr (in hex format) #P115 = #P116 = #P117 = #P118 = #P119 = #P120 = # Enable LAN DHCP. 0 - No, 1 - Yes P5001 = 1 # LAN DHCP Base IP. (base IP for the LAN port, default is 192.168.2.1) #P111 = 192.168.2.1 # LAN DHCP Start IP. (default is 100) P5002 = 100 # LAN DHCP End IP. (default is 199) P5003 = 199 # LAN Subnet Mask. Default is 255.255.255.0. #P110 = #DHCP IP Lease Time, in units of hours, default is 120 hours or 5 days. #P112 = 120 #DMZ IP. #P113 = #----------------------------------------------------------- # Port Forwarding Settings. #----------------------------------------------------------- ############# Choice 1 #################################### # WAN Port P150 =0 # LAN IP P158 = # LAN Port P166 =0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P174 =0 ############# Choice 2 #################################### # WAN Port P151 =0 # LAN IP P159 = # LAN Port P167 =0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P175 =0 ############# Choice 3 #################################### # WAN Port P152 =0 # LAN IP P160 = # LAN Port P168 =0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P176 =0 ############# Choice 4 #################################### # WAN Port P153 =0 # LAN IP P161 = # LAN Port P169 =0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P177 =0 ############# Choice 5 #################################### # WAN Port P154 =0 # LAN IP P162 = # LAN Port P170 =0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P178 =0 ############# Choice 6 #################################### # WAN Port P155 =0 # LAN IP P163 = # LAN Port P171 =0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P179 =0 ############# Choice 7 #################################### # WAN Port P156 =0 # LAN IP P164 = # LAN Port P172 =0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P180 =0 ############# Choice 8 #################################### # WAN Port P157 = 0 # LAN IP P165 = # LAN Port P173 = 0 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. P181 = 0 ##UNKNOWN## # Forcing a Codec per call. *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *0272616 (G726-r16), *0272624 (G724-r24), *0272632 (G726-r32), *0272640 (G726-r40), *027201 (iLBC) #*02 P4351=*027110 P4352=*027111 P4353=*02723 P4354=*02729 P4355=*0272616 P4356=*0272624 P4357=*0272632 P4358=*0272640 P4359=*021 #unknown P737 =2 P743=0 P229=0 P108=0 P37=2 P245=8 P4306=0 P133=1 P711=0 P4500=0 P4501=1 P4502=0 P200=0 P86=0 P206=2